© 1995 - 2018 Family Technologies
Created by Family Technologies, using Xara
Pulsed Electromagnetic Field and Hi-
Intensity LED Stimulator
Pulsed Electromagnetic Fields (PEMF) have been used for decades to help
the body heal itself in a variety of conditions. Recently, PEMF devices have
been certified for use in conditions involving bone fractures, migraine
headaches, and pain remediation. High intensity LED light has also been
shown to have many very beneficial effects on physiology to assist healing.
Our ChromoMag has both! One powerful advantage of Pulsed
Electromagnetic Fields over LEDs alone, is that PEMF penetrates completely
through the body while even IR LEDs are limited to approximately 1 inch of
The ChromoMag combines a 1100 gauss adjustable frequency magnetic
pulse with 4 Near Infra Red LEDs (8W max output) to provide dual action
1100 Gauss pulsed electromagnet
7.8 to 1000 Hz adjustable frequency
Adjustable time duration up to 10 minutes.
Hand-held 4” diameter POD with 6’ cord is easy to use
Comes with IR LED module installed in POD
Optionally add 3 NIR LED paddles which can be controlled completely
Simple to Use
Plug AC power cord into ChromoMag and wall power socket.
Plug electromagnet POD into ChromoMag front panel.
Set timer duration from 3 to 10 minutes. Normally use longer duration for
lower power and shorter duration for higher power.
Set frequency from 7.8 to 1000 Hz. Normally use 1000 Hz for pain or wound
Hold POD in position on the body. If an open wound is being treated, use a
piece of plastic wrap or gauze between the wound and the POD.
Press the START button to initiate a session. If you wish to terminate a
session before time runs out, either press the START button again, or
turn off the power switch.
4” stimulator POD with IR module and 6’ cord
AC power cord
4” diameter stimulator POD
ChromoMag with PEMF POD and
3 Near Infrared paddles.