© 1995 - 2018 Family Technologies
Created by Family Technologies, using Xara
Hi Intensity Red and IR stimulator
How does it work?
Red and IR light penetrates body tissue to accelerate healing and relieve
pain. It is absorbed by photo receptors in an enzyme (Cytochrome
Oxidase) in the cell Mitochondria which plays an important role in
energy production. Basically with red and IR light, you can directly
supply additional energy to cells at a point of need. IR frequency
penetrates approximately twice the depth of visible red LED. Note that
the maximum depth is approximately 1 inch, so effectiveness will drop
off past that point. For stimulation at deeper penetration, take a look at
our PEMF products.
Typically used for
Wound healing - may reduce time to heal by up to 50%
Pain remediation - may literally erase the painful feelings
Skin Tightening - 80% - 90% of users reported skin tightening
Body Sculpting - releases lipids from adipose tissue to shrink inches away from fatty deposits
Please note that the FDA has not approved these devices to prevent, treat, or cure any disease.
Simple to Use
Position paddles on area to be treated and hold in place with elastic belt or clothing. Do not put paddle light directly
Turn on Power button on control unit to start a session. Power will turn off at ~3 min and the red WAIT light will
illuminate. This indicates an ~8 min cool-down period. When the cool-down period ends another session may be started.
Caution - Running several sessions in a row, or not allowing a cool down period between session can cause paddles to get quite warm. If they exceed
approximately 140 deg internally, a thermal switch will cut off power. Just let them cool down and then run a session.
3 high intensity LED paddles
3 - 6 foot cables
AC power adapter